Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 25
Remote access
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Install license OS10# license install scp://user:[email protected]/CFNNX42-NOSEnterprise-License.xml License installation success. Verify license installation OS10# show license status System Information Vendor Name : DELL Product Name : S4048-ON Hardware Version: A00 Platform Name : S4048-ON PPID : CN0M68YC2829855M0133 Service Tag : CFNNX42 License Details Software : OS10-Enterprise Version : 10.3.0E License Type : PERPETUAL License Duration: Unlimited License Status : Active License location: /mnt/license/CFNNX42.lic Troubleshoot license installation failure An error message displays if the installation fails. License installation failed 1 Verify the installation path to the local or remote location you tried to download the license from. 2 Check the log on the remote server to see why the FTP or TFTP file transfer failed. 3 Ping the remote server from the switch - use the ping and traceroute commands to test network connectivity. If the ping fails: • Check if a Management route is configured on the switch. If not, use the management route command to configure a route to the server network. • Install the server with the license file on the same subnet as switch. 4 Check if the server is up and running. Remote access You can remotely access the OS10 command-line interface (CLI) and the Linux shell. When you install OS10 the first time, connect to the switch using the serial port. Configure remote access • Configure the Management port IP address • Configure a default route to the Management port • Configure a user name and password Remote access OS10 CLI 1 Open an SSH session using the IP address of the device. You can also use PuTTY or a similar tool to access the device remotely. ssh admin@ip-address password: admin 2 Enter admin for both the default user name and password to log into OS10. You are automatically placed in EXEC mode. OS10# Getting Started 25