Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 370
show ip ospf routes, show ip ospf statistics, Parameters, Default, Command Mode, Example
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 370 highlights
Parameters • process-id - (Optional) Displays information for an OSPF Process ID. If you do not enter a Process ID, this command applies only to the first OSPF process. • interface - (Optional) Enter the interface information: • ethernet - Enter the Ethernet interface information (1 to 48) • port channel - Enter the port-channel interface number (1 to 128). • vlan - Enter the VLAN interface number (1 to 4094). Default Command Mode Example Not configured EXEC OS10# show ip ospf interface ethernet1/1/1 is up, line protocol is up Internet Address 10.0.0.2/24, Area 0.0.0.0 Process ID 200, Router ID 10.0.0.2, Network Type broadcast, Cost: 1 Transmit Delay is 1 sec, State DR, Priority 1 Designated Router (ID) 10.0.0.2, Interface address 10.0.0.2 (local) Backup Designated router (ID) , Interface address 0.0.0.0 Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Simple password authentication enabled Neighbor Count is 0, Adjacent neighbor count is 0 Supported Releases 10.2.0E or later show ip ospf routes Displays OSPF routes received from neighbors along with parameters like cost, next-hop, area, interface, and type of route. Syntax Parameters show ip ospf [process-id] routes [prefix IP-prefix] • process-id - (Optional) Enter OSPFv2 Process ID to view information specific to the ID. • IP-prefix - (Optional) Specify an IP address to view information specific to the IP address. Default Command Mode Usage Information Example None EXEC Displays the cost metric for each neighbor and interfaces. OS10# show ip ospf 10 routes Prefix Cost Nexthop 110.1.1.0 1 0.0.0.0 intra-area 111.1.1.0 1 0.0.0.0 intra-area 111.2.1.0 1 0.0.0.0 intra-area Interface vlan3050 vlan3051 vlan3053 Area 0.0.0.0 0.0.0.0 0.0.0.0 Type Supported Releases 10.2.0E or later show ip ospf statistics Displays OSPF traffic statistics. Syntax • show ip ospf [instance-number] statistics [interface interface] 370 Layer 3