Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 604
Add members to port channel 10, OSPF on L3 side of core router
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 604 highlights
• Add members to port channel 20: D1(config)# interface ethernet 1/1/5 D1(conf-if-eth1/1/5)# channel-group 20 D1(conf-if-eth1/1/5)# exit D1(config)# interface ethernet 1/1/6 D1(conf-if-eth1/1/6)# channel-group 20 D1(conf-if-eth1/1/6)# exit Sample configuration of C2: • Configure peer routing: C2(config)# vlt-domain 20 C2(conf-vlt-20)# discovery-interface ethernet1/1/1 C2(conf-vlt-20)# discovery-interface ethernet1/1/2 C2(conf-vlt-20)# peer-routing C2(conf-vlt-20)# exit • Configure VRRP on L2 links between core routers: C2(config)# interface vlan 100 C2(conf-if-vl-100)# ip address 10.10.100.3/30 C2(conf-if-vl-100)# vrrp-group 10 • Configure VLT port channel for VLAN 100: C2(config)# interface port-channel 10 C2(conf-if-po-10)# vlt-port-channel 10 C2(conf-if-po-10)# switchport mode trunk C2(conf-if-po-10)# switchport trunk allowed vlan 100 C2(conf-if-po-10)# exit • Add members to port channel 10: C2(config)# interface ethernet 1/1/3 C2(conf-if-eth1/1/3)# channel-group 10 C2(conf-if-eth1/1/3)# exit C2(config)# interface ethernet 1/1/4 C2(conf-if-eth1/1/4)# channel-group 10 C2(conf-if-eth1/1/4)# exit • Configure OSPF on L3 side of core router: C2(config)# router ospf 100 C2(conf-router-ospf-100)# exit C2(config)# interface vlan 200 C2(conf-if-vl-200)# ip ospf 100 area 0.0.0.0 • Configure VLT port channel for VLAN 200: C2(config)# interface port-channel 20 C2(conf-if-po-20)# vlt-port-channel 20 C2(conf-if-po-20)# switchport mode trunk C2(conf-if-po-20)# switchport trunk allowed vlan 200 C2(conf-if-po-20)# exit • Add members to port channel 20: C2(config)# interface ethernet 1/1/5 C2(conf-if-eth1/1/5)# channel-group 20 C2(conf-if-eth1/1/5)# exit C2(config)# interface ethernet 1/1/6 C2(conf-if-eth1/1/6)# channel-group 20 C2(conf-if-eth1/1/6)# exit Sample configuration of D2: • Configure peer routing: D2(config)# vlt-domain 20 D2(conf-vlt-20)# discovery-interface ethernet1/1/1 D2(conf-vlt-20)# discovery-interface ethernet1/1/2 D2(conf-vlt-20)# peer-routing D2(conf-vlt-20)# exit 604 Virtual link trunking