Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 473

Type Boot Type Active Standby Next-Boot Node-id 1 Flash Boot [A] 10.2.0E.1965 [B] 10.2.0E.1985 [A] active Upgrade commands boot system Sets the boot partition to use during the next reboot. Syntax Parameters boot system {active | standby} • active - Reset the running partition as the next boot partition. • standby - Set the standby partition as the next boot partition. Default Command Mode Usage Information Example Active EXEC Use this command to configure the location of the OS10 image used to reload the software at boot time. Use the show boot command to view the configured next boot image. This command is applied immediately and does not require the commit command. OS10# boot system standby Supported Releases 10.2.0E or later image cancel Cancels an active image download. Syntax image cancel Parameters None Default Not configured Command Mode EXEC Usage Information This command attempts to cancel an active file download in progress. Example OS10# image cancel Supported Releases 10.2.0E or later image copy Copies the entire image in the active partition to the standby partition (mirror image). Syntax Parameters image copy active-to-standby active-to-standby - Enter to copy the entire image in the active partition to the standby partition (mirror image). System management 473