Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 573
police, policy-map
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 573 highlights
Example OS10(conf-sys-qos)# pfc-shared-headroom-buffer-size 2000 Supported Releases 10.4.0E(R1) or later police Configures traffic policing on incoming traffic. Syntax Parameters police {cir committed-rate [bc committed-burst-size]} {pir peak-rate [be peakburst-size]} • cir committed-rate - Enter a committed rate value in kilo bits per second (0 to 4000000). • bc committed-burst-size - (Optional) Enter a committed burst size in packets for the control plane and kilobytes (16 to 200000). • pir peak-rate - Enter a peak-rate value in kilo bits per second (0 to 40000000). • be peak-burst-size - (Optional) Enter a peak burst size in kilo bytes (16 to 200000). Defaults • bc committed-burst-size value is 200 KB for control plane and 100 KB for all other class-map types • be peak-burst-size value is 200 KB for control plane and 100 KB for all other class-map types Command Mode Usage Information Example POLICY-MAP-CLASS-MAP If you do not provide the peak-rate pir values, the committed-rate cir values are taken as the pir values. Only the ingress QoS policy type supports this command. For control-plane policing, the rate values are in pps. OS10(conf-pmap-c-qos)# police cir 5 bc 30 pir 20 be 40 Supported Releases 10.2.0E or later policy-map Enters QoS POLICY-MAP mode and creates or modifies a QoS policy-map. Syntax policy-map policy-map-name [type {qos | queuing | control-plane}] Parameters • policy-map-name - Enter a class name for the policy-map (up to 32 characters). • type - Enter the policy-map type. • qos - Create a qos policy-map type. • queuing - Create a queueing policy-map type. • control-plane - Create a control-plane policy-map type. Defaults Command Mode Usage Information Example qos = class-map type and match-any = class-map filter CONFIGURATION The no version of this command deletes a policy-map. OS10(config)# policy-map p1 Quality of service 573