Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 389

Example OS10(config)# router ospfv3 100 OS10(config-router-ospfv3-100)# redistribute bgp 4 route-map dell1 Example (Connected) OS10((config-router-ospfv3-100)# redistribute connected route-map dell2 Supported Releases 10.3.0E or later router-id Configures a fixed router ID for the OSPFv3 process. Syntax Parameters Default Command Mode Usage Information Example router-id ip-address ip-address - Enter the IP address of the router as the router ID. Not configured ROUTER-OSPFv3 Configure an arbitrary value in the IP address format for each router. Each router ID must be unique. Use the fixed router ID for the active OSPFv3 router process. Changing the router ID brings down the existing OSPFv3 adjacency. The new router ID is effective at the next reload. The no version of this command disables the router ID configuration. OS10(config)# router ospfv3 10 OS10(config-router-ospfv3-100)# router-id 10.10.1.5 Supported Releases 10.3.0E or later router ospfv3 Enters Router OSPFv3 mode and configures an OSPFv3 instance. Syntax router ospfv3 instance-number Parameters instance-number-Enter a router OSPFv3 instance number, from 1 to 65535. Default Not configured Command Mode CONFIGURATION Usage Information The no version of this command deletes an OSPFv3 instance. Example OS10(config)# router ospfv3 10 Supported Releases 10.3.0E or later show ipv6 ospf Displays OSPFv3 instance configuration information. Syntax Parameters Default Command Mode Usage Information show ipv6 ospf [instance-number] instance-number - (Optional) View OSPFv3 information for a specified instance number (1 to 65535) None EXEC None Layer 3 389