Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 580

set cos Sets a cost of service (CoS) value to mark L2 802.1p (dot1p) packets. Syntax set cos cos-value Parameters cos-value - Enter a CoS value (0 to 7). Default Not configured Command Mode POLICY-MAP-CLASS-MAP Usage Information You cannot enter two set statements with the same action-type. If you enter two set statements with the same action-type, the second statement overwrites the first. When class-map type is qos, the qos-group corresponds to data queues 0 to 7. Example OS10(conf-pmap-c-qos)# set cos 6 Supported Releases 10.2.0E or later set dscp Sets the drop precedence for incoming packets based on their DSCP value and color map profile. Syntax Parameters set dscp dscp-value [color {red | yellow}] • dscp-value - Enter a DSCP value (0 to 63). • color - (Optional) - Enter to apply a color map profile. • red - (Optional) Enter to mark the packets to drop. • yellow - (Optional) Enter to mark the packets to deliver to the egress queue. Default Command Mode Usage Information Example Not configured POLICY-MAP-CLASS-MAP The QoS ingress QoS policy type only supports this command. Packets marked as color yellow deliver to the egress queue, then the egress queue transmits the packets with the available bandwidth. If bandwidth is not available, the packets drop. All packets marked as color red drop. When class-map type is qos, the qos-group corresponds to data queues 0 to 7. OS10(conf-pmap-c-qos)# set dscp 10 color yellow Supported Releases 10.2.0E or later set qos-group Configures marking for the QoS-group queues. Syntax set qos-group queue-number Parameters queue-number - Enter a queue number (0 to 7). Default Not configured 580 Quality of service