Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 603
VRRP on L2 links between core routers, VLT port channel for VLAN 100
![]() |
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 603 highlights
• Add members to port channel 10: C1(config)# interface ethernet 1/1/3 C1(conf-if-eth1/1/3)# channel-group 10 C1(conf-if-eth1/1/3)# exit C1(config)# interface ethernet 1/1/4 C1(conf-if-eth1/1/4)# channel-group 10 C1(conf-if-eth1/1/4)# exit • Configure OSPF on L3 side of core router: C1(config)# router ospf 100 C1(conf-router-ospf-100)# exit C1(config)# interface vlan 200 C1(conf-if-vl-200)# ip ospf 100 area 0.0.0.0 • Configure VLT port channel for VLAN 200: C1(config)# interface port-channel 20 C1(conf-if-po-20)# vlt-port-channel 20 C1(conf-if-po-20)# switchport mode trunk C1(conf-if-po-20)# switchport trunk allowed vlan 200 C1(conf-if-po-20)# exit • Add members to port channel 20: C1(config)# interface ethernet 1/1/5 C1(conf-if-eth1/1/5)# channel-group 20 C1(conf-if-eth1/1/5)# exit C1(config)# interface ethernet 1/1/6 C1(conf-if-eth1/1/6)# channel-group 20 C1(conf-if-eth1/1/6)# exit Sample configuration of D1: • Configure peer routing: D1(config)# vlt-domain 10 D1(conf-vlt-10)# discovery-interface ethernet1/1/1 D1(conf-vlt-10)# discovery-interface ethernet1/1/2 D1(conf-vlt-10)# peer-routing D1(conf-vlt-10)# exit • Configure VRRP on L2 links between core routers: D1(config)# interface vlan 100 D1(conf-if-vl-100)# ip address 10.10.100.2/30 D1(conf-if-vl-100)# vrrp-group 10 • Configure VLT port channel for VLAN 100: D1(config)# interface port-channel 10 D1(conf-if-po-10)# vlt-port-channel 10 D1(conf-if-po-10)# switchport mode trunk D1(conf-if-po-10)# switchport trunk allowed vlan 100 D1(conf-if-po-10)# exit • Add members to port channel 10: D1(config)# interface ethernet 1/1/3 D1(conf-if-eth1/1/3)# channel-group 10 D1(conf-if-eth1/1/3)# exit D1(config)# interface ethernet 1/1/4 D1(conf-if-eth1/1/4)# channel-group 10 D1(conf-if-eth1/1/4)# exit • Configure OSPF on L3 side of core router: D1(config)# router ospf 100 D1(conf-router-ospf-100)# exit D1(config)# interface vlan 200 D1(conf-if-vl-200)# ip ospf 100 area 0.0.0.0 • Configure VLT port channel for VLAN 200: D1(config)# interface port-channel 20 D1(conf-if-po-20)# vlt-port-channel 20 D1(conf-if-po-20)# switchport mode trunk D1(conf-if-po-20)# switchport trunk allowed vlan 200 D1(conf-if-po-20)# exit Virtual link trunking 603
![](/manual_guide/products/dell-s4148uon-os10-enterprise-edition-user-guide-release-1040e-r2-86f2ab4/603.png)