Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 393
Object tracking manager
![]() |
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 393 highlights
timers spf (OSPFv3) Enables shortest path first (SPF) throttling to delay an SPF calculation when a topology change occurs. Syntax timers spf [start-time [hold-time [max-wait]]] Parameters • start-time - Sets the initial SPF delay in milliseconds (1 to 600000; default 1000). • hold-time - Sets the additional hold time between two SPF calculations in milliseconds (1 to 600000; default 10000). • max-wait - Sets the maximum wait time between two SPF calculations in milliseconds (1 to 600000; default 10000). Default • start-time - 1000 milliseconds • hold-time - 10000 milliseconds • max-wait - 10000 milliseconds Command Mode Usage Information ROUTER-OSPFv3 OSPFv2 and OSPFv3 support SPF throttling. By default, SPF timers are disabled in an OSPF instance. Use SPF throttling to delay SPF calculations during periods of network instability. In an OSPF network, a topology change event triggers an SPF calculation after a specified start time. When the start timer finishes, a hold time may delay the next SPF calculation for an additional time. When the hold timer is running: • Each time a topology change occurs, the SPF calculation is delayed for double the configured hold time up to maximum wait time. • If no topology change occurs, an SPF calculation is performed and the hold timer is reset to its configured value. If you do not specify a start-time, hold-time or max-wait value, the default values are used. The no version of this command removes the configured SPF timers and disables SPF throttling in an OSPF instance. Example OS10(config)# router ospfv3 100 OS10(config-router-ospfv3-100)# timers spf 1345 2324 9234 OS10(config-router-ospfv3-100)# do show ipv6 ospf Routing Process ospfv3 100 with ID 129.240.244.107 SPF schedule delay 1345 msecs, Hold time between two SPFs 2324 msecs Min LSA origination 5000 msec, Min LSA arrival 1000 msec Min LSA hold time 0 msec, Max LSA wait time 0 msec Number of area in this router is 1, normal 1 stub 0 nssa Area (0.0.0.1) Number of interface in this area is 1 SPF algorithm executed 2 times Supported Releases 10.4.0E(R1) or later Object tracking manager Object tracking manager (OTM) allows you to track the link status of Layer 2 interfaces, and the reachability of IP and IPv6 hosts. You can increase the availability of the network and shorten recovery time if an object state goes Down. Object tracking monitors the status of tracked objects and communicates any changes made to interested client applications. OTM client applications are VRRP and PBR. Each tracked object has a unique identifying number that clients use to configure the action to take when Layer 3 393
![](/manual_guide/products/dell-s4148uon-os10-enterprise-edition-user-guide-release-1040e-r2-86f2ab4/393.png)