Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 97

Supported Releases 10.4.0E(R1) or later description (Interface) Configures a textual description of an interface. Syntax description string Parameters string - Enter a text string for the interface description (up to 240 characters). Default Not configured Command Mode INTERFACE Usage Information • To use special characters as a part of the description string, enclose the string in double quotes. • Spaces between characters are not preserved after entering this command unless you enclose the entire description in quotation marks ("text description"). • Enter a text string after the description command to overwrite any previous text string that you previously configured as the description. • The shutdown and description commands are the only commands that you can configure on an interface that are a member of a port-channel. • Use the show running-configuration interface command to view descriptions configured for each interface. • The no version of this command deletes the description. Example OS10(conf-if-eth1/1/7)# description eth1/1/7 Supported Releases 10.2.0E or later duplex Configures duplex mode on the Management port. Syntax Parameters duplex {full | half | auto} • full - Specify to set the physical interface to transmit in both directions. • half - Specify to set the physical interface to transmit in only one direction. • auto - Specify to set the physical interface to transmit automatically. Defaults Command Mode Usage Information Example Not configured CONFIGURATION This command can only be used on the Management port. The no version of this command resets the value to the default. OS10(conf-if-ma-1/1/1)# duplex auto Supported Releases 10.3.0E or later Interfaces 97