Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 384

default-information originate Generates and distributes a default external route information to the OSPFv3 routing domain. Syntax default-information originate [always] Parameters always - (Optional) Always advertise the default route. Defaults Disabled Command Mode ROUTER-OSPFv3 Usage Information The no version of this command disables the distribution of default route. Example OS10(config)# router ospfv3 100 OS10(config-router-ospfv3-100)# default-information originate always Supported Releases 10.3.0E or later ipv6 ospf area Attaches an interface to an OSPF area. Syntax ipv6 ospf process-id area area-id Parameters • process-id-Enter an OSPFv3 process ID for a specific OSPFv3 process (1 to 65535). • area-id-Enter the OSPFv3 area ID in dotted decimal format (A.B.C.D) or enter an area ID number (1 to 65535). Default Command Mode Usage Information Example Not configured INTERFACE The no version of this command removes an interface from an OSPFv3 area. OS10(config)# interface vlan 10 OS10(conf-if-vl-10)# ipv6 ospf 10 area 1 Supported Releases 10.3.0E or later ipv6 ospf authentication Configures OSPFv3 authentication on an IPv6 interface. Syntax ipv6 ospf authentication {null | ipsec spi number {MD5 | SHA1} key} Parameters • null - Prevents area authentication from being inherited on the interface. • ipsec spi number - Enter a unique security policy index number (256 to 4294967295). • md5 - Enable MD5 authentication. • sha1 - Enable SHA-1 authentication. • key - Enter the text string used by the authentication type. Default Command Mode IPv6 OSPF authentication is not configured on an interface. INTERFACE 384 Layer 3