Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 404

Defaults Command Mode Usage Information Example Not configured ROUTE-MAP None OS10(conf-route-map)# set ip next-hop 10.10.10.10 track-id 12 Supported Releases 10.3.0E or later show policy Displays policy information. Syntax show {ip | ipv6} policy [map-name] Parameters map-name - (Optional) Enter the name of a configured route map (up to 140 characters). Defaults None Command Mode EXEC Usage Information None Example OS10# show ip policy map-name Supported Releases 10.3.0E or later show route-map pbr-statistics Displays the current PBR statistics. Syntax Parameters Defaults Command Mode Usage Information Example show route-map [map-name] pbr-statistics map-name - (Optional) Enter the name of a configured route map (up to 140 characters). None EXEC None OS10# show route-map map1 pbr-statistics Supported Releases 10.3.0E or later Virtual routing and forwarding Virtual routing and forwarding (VRF) allows to partition a physical router into multiple virtual routers. The control and data plane are isolated in each virtual router (VR) so that traffic does not flow across VRs. VRF allows multiple instances of routing tables to co-exist within the same router at the same time. OS 10 supports a management VRF instance and a default VRF instance. You can add management ports to the management VRF instance. All the front panel ports and logical interfaces are part of the default VRF instance. 404 Layer 3