Dell S4148U-ON OS10 Enterprise Edition User Guide Release 10.4.0E R2 - Page 250
source Port Monitoring, source-ip
![]() |
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Example OS10(config)# monitor session 1 OS10(conf-mon-local-1)# no shut OS10(config)# monitor session 5 type rspan-source OS10(conf-mon-rspan-source-5)# no shut OS10(config)# monitor session 10 type erpm-source OS10(conf-mon-erpm-source-10)# no shut Supported Releases 10.2.0E or later source (Port Monitoring) Configures a source for port monitoring. The monitoring session can be one of the following: local, RPM, or ERPM. Syntax source interface interface-type {both | rx | tx} Parameters • interface-type - Enter the interface type: • ethernet node/slot/port[:subport] - Enter the Ethernet interface information as the monitored source. • port-channel id-number - Enter the port-channel interface number as the monitored source (1 to 128). • vlan vlan-id -Enter the VLAN identifier as the monitored source (1 to 4094). • both - Monitor both receiving and transmitting packets. This option is not available for VLAN. • rx - Monitor only received packets. • tx - Monitor only transmitted packets. This option is not available for VLAN. Default Command Mode Usage Information Example Not configured MONITOR-SESSION None OS10(config)# monitor session 1 OS10(conf-mon-local-1)# source interface ethernet 1/1/7 rx OS10(config)# monitor session 5 type rspan-source OS10(conf-mon-rspan-source-5)# source interface ethernet 1/1/10 tx OS10(config)# monitor session 10 type erpm-source OS10(conf-mon-erpm-source-10)# source interface ethernet 1/1/5 rx Supported Releases 10.2.0E or later source-ip Configures the source, destination, and protocol type of the monitored port for an ERPM monitoring session. Syntax Parameters source-ip source ip-address destination-ip destination ip-address [gre-protocol protocol-value] • source ip-address - Enter the source IP address. • destination ip-address - Enter the destination IP address. • protocol-value - Enter the GRE protocol value (1 to 65535, default: 35006). 250 Layer 2
![](/manual_guide/products/dell-s4148uon-os10-enterprise-edition-user-guide-release-1040e-r2-86f2ab4/250.png)