Epson C3400 Technical Reference Guide TRG - Page 198
Setting Check Modes, Self-test Mode
View all Epson C3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Setting Check Modes Besides the ordinary print mode, the printer has the self-test mode and allows you to print the status sheet (Ethernet interface model only) to check the various settings of the printer. Self-test Mode Printing errors such as dot missing can be checked on self-test mode. In addition, the firmware version, Post-Printing Verification Settings, and media position detection setting can be checked. Follow the steps below to run the self-test. 1 Set the die-cut label, receipt or continuous label which length is 90 mm or more. 2 Turn the power on while pressing the paper feed button. (Keep pressing the Power switch until the POWER LED is on.) Following test pattern is printed. Firmware Version Post-Printing Verification Setting Media Position Dctection 198