Epson C3400 Technical Reference Guide TRG - Page 43

Chapter 1 Product Overview Paper type Plain Media Label, Fine Media Label Form Fanfold paper Backing paper width 50 to 112 mm Label width 46 to 108 mm Label length 15 to 301.8 mm Gap between labels 3 to 6 mm Edge cutoff on left/right side 2 ± 0.5 mm Label edge R 2 mm or less Black mark width 13 mm or more 1 Black mark length 5 mm or more Black mark centering position 8.5 ± 1 mm Black mark interval 15 to 304.8 mm Paper thickness 0.145 to 0.161 mm Perforated line pitch: 203.2 to 304.8 mm Perforated line form: Plain media label : 1 mm uncut, 5 mm cut Fine media label : 1 mm uncut, 5 mm cut Synthetic media label : Number of folds: 500 or less • Do not use the paper with a hole or cutout. • When using fanfold paper, the black marks must be at least 2 mm from the perforated lines. • when using this type of paper, the label end and the black mark end of the black mark position on the die-cut label must be matched. • Make sure to keep the same position of the black marks to the perforated lines (position that can be detected by black mark sensor) when inserting the paper from either side in order to use the paper inserting from reverse direction. 43