Epson C3400 Technical Reference Guide TRG - Page 201
Head Cleaning, Manual Head Cleaning, Manual Head Cleaning during printing
View all Epson C3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Chapter 4 Handling Head Cleaning The auto nozzle check function is installed to the printer, and the head is automatically cleaned in the normal operation. However, when Post-Printing Verification Settings, the print result may not be clear or print in the abnormal colors depending on some settings due to the clogging of the print head. Clean the head in that case. Use [maintenance and utilities] function on the printer driver to run head cleaning. Make settings with [Post-Printing Verification Settings] on [Maintenance And Utilities] tab when dot is missing. (See "Post-Printing Verification Settings" on page 192) Manual Head Cleaning The printer checks the nozzles, and run an manual head cleaning automatically if clogging occurs. Follow the steps below to manual head cleaning. The ink is used for head cleaning, so if the ink is low, the ink may run out during the cleaning. 1 Turn the power on. 2 Display the window on the printer driver. (See "How to Use the Printer Driver" on page 160 for how to display the driver window.) 3 Click [Manual Head Cleaning] on [Maintenance And Utilities] tab. 4 The printer nozzle is checked and head is automatically cleaned when it is clogged. The cleaning repeats 5 times at the maximum. 4 Execute a nozzle check and check the cleaning result. Manual Head Cleaning during printing Normally faint and printing during printing or when it is printed in different colors, you can print the manual head cleaning while paper feed button is pressed. This feature is factory set to invalid. Please enable printer driver. (See "Panel Button Settings" on page 115) • If the problem starts head cleaning manual paper feed button is pressed during printing, a few seconds Be sure if the paper feed button again. • This feature can be copied to the printer with other BSF files and PrinterSetting files can not be. You have to be set for each printer. 201