Epson C3400 Technical Reference Guide TRG - Page 69
For Ethernet Interface Model, connector clicks into place and arrange it as shown below.
View all Epson C3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 2 Setup For Ethernet Interface Model Connect the printer to a network by a LAN cable via a hub. CAUTION • When LAN cables are installed outdoors, make sure devices without proper surge protection are cushioned by being connected through devices that do have surge protection. Otherwise, the devices can be damaged by lightning. • Never attempt to connect the standard telephone line cable to the 10/100BASE-T LAN connector. 1 Open the connector cover on the rear of the printer. 2 Connect a LAN cable to the LAN connector by pressing firmly until the connector clicks into place and arrange it as shown below. Make sure to put the USB cable through the cable hook as shown in the figure below to prevent the cable from coming unplugged. 2 Cable hook: Prevents cable from coming unplugged. 3 Close the connector cover. 69