Epson PictureMate Charm - PM 225 User's Guide - Page 62
Printing and Operation Problems, PictureMate makes an unexpected noise after
View all Epson PictureMate Charm - PM 225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Caution: Never use a hard or abrasive brush, or alcohol or thinner for cleaning; they can damage the components and case. Don't get water on the components and don't spray lubricants or oils inside PictureMate. Printing and Operation Problems The On light and photo viewer screen don't turn on. ● Press the P On button to turn on PictureMate. ● Make sure the power cable and AC adapter are securely connected at both ends. ● Make sure your power outlet works and is not controlled by a wall switch or timer. ● If you're using the optional battery, it may not be charged. Connect the AC adapter and plug it into an electrical outlet to charge the battery. ● If you're using the optional battery, PictureMate automatically turns off after 15 minutes if it is not being used. Press the P On button to turn it back on. The photo viewer screen goes blank. The screen shuts off after 13 minutes if PictureMate is not used. Press any button (except the P On button) to turn it back on. PictureMate makes an unexpected noise after you install a photo cartridge. The first time you install the photo cartridge, PictureMate charges its print head for about three and a half minutes. Wait until charging finishes before you turn it off, or it may charge improperly and use more ink the next time you turn it on. Your PictureMate makes an unexpected noise when you turn it on or after it has been sitting for a while. PictureMate is performing routine maintenance. PictureMate sounds as though it is printing, but nothing prints. ● PictureMate may be preparing to print. ● The print head may need cleaning. See page 41. ● PictureMate won't work properly if it's tilted or at an angle. Place it on a flat, stable surface. 46