Epson PowerLite 54c User Manual - Page 69

Resetting the Lamp Timer

Get Epson PowerLite 54c PDF manuals and user guides View all Epson PowerLite 54c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

10. Position the lamp cover so the arrows on the lamp cover align with the arrows on the projector. Then slide in the cover until it clicks into place. 1 2 11. Reset the lamp timer as described below. Resetting the Lamp Timer You must reset the lamp timer after replacing the lamp to clear the Lamp Replace warning message. Follow these steps: 1. Connect the power cable and turn on the projector. 2. Press the Menu button on the remote control and select the Info menu. Then press Enter. You see the following: note Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of hours that the lamp has been used. Maintaining and Transporting the Projector 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Maintaining and Transporting the Projector
69
10.
Position the lamp cover so the arrows on the lamp cover align
with the arrows on the projector. Then slide in the cover until it
clicks into place.
11.
Reset the lamp timer as described below.
Resetting the Lamp Timer
You must reset the lamp timer after replacing the lamp to clear the
Lamp Replace
warning message. Follow these steps:
1.
Connect the power cable and turn on the projector.
2.
Press the
Menu
button on the remote control and select the
Info
menu. Then press
Enter
. You see the following:
1
2
note
Do not reset the lamp timer if
you have not replaced the
lamp. If you do, the Lamp
Hours will not accurately
reflect the number of hours
that the lamp has been used.