Epson PowerLite 54c User Manual - Page 74
Power, light, Warning, Status, Description, Warming up
View all Epson PowerLite 54c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Power light Warning light Status Description - Flashing red at Internal error There is an internal error in the projector. Turn 1-second the projector off and unplug it. Contact EPSON intervals for help. - Flashing red at Lamp failure The lamp is burned out, broken, or not installed 0.5-second correctly; or the lamp cover is open. Close the intervals cover or replace or reseat the lamp, if necessary, as described on page 67. If you need to replace the lamp, see page 67. - Red Overheating The projector has overheated and turned itself off. Let it cool for a few minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. Also clean the air filter. See page 65. If it continues to overheat, you may need to replace the air filter. - Flashing orange High The projector is too hot. Make sure the (quickly) temperature temperature surrounding the projector does warning not exceed 95 ° F (35 ° C) and there is plenty of space around and under the projector for ventilation. Clean the air filter, if necessary. See page 65 for instructions. Orange Off Standby (sleep) mode The projector is in standby or sleep mode. You can unplug it or press the P Power button to turn it on. Flashing green Off Warming up The projector is warming up. Wait for the image to appear. Green Off Operating The projector is operating normally. Flashing orange Off Cooling down The projector is cooling down. Wait for the light to stay lit orange without flashing before unplugging it. 74 Solving Problems