Epson PowerLite 54c User Manual - Page 82
Solving Password Problems, Solving Problems with the Remote Control
View all Epson PowerLite 54c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Solving Password Problems You have forgotten the password. ■ Write down the request code that appears in the Password Protect Release screen and contact EPSON. See "Where To Get Help" on page 83. ■ If you turned on the password protect feature before setting the password and no password was set before, try using the default password: 0000. You don't have the remote control. You must have the remote control to enter the password. If necessary, you can purchase a replacement remote control from EPSON (part number: V12H007T13). Solving Problems with the Remote Control The projector doesn't respond to remote control commands. ■ Make sure the tape has been removed from the battery tray as described on page 40. ■ Make sure you are within 20 feet of the projector, and within range of the projector's front or back sensor (approximately 30° to the left or right and 15° above or below). ■ The remote control battery may not be installed correctly or may be low on power. Change the battery as described on page 44. ■ Dim the room lights and turn off any fluorescents. Make sure the projector is not in direct sunlight. Strong lighting, especially fluorescent lights, may affect the projector's infrared receivers. ■ Turn off any nearby equipment that emits infrared energy, such as a radiant room heater. 82 Solving Problems