Epson Stylus C80WN User Setup Information - Page 21

Installing Software and Configuring the Print Server This chapter explains how to install the software you need to configure the EpsonNet 802.11b Wireless Print Server and use it on a Windows or AppleTalk network. It also explains how to set up additional computers to use the printer on a wireless network. Your printer CD-ROM includes the following software: I EPSON Stylus C80WN printer driver You must install the printer driver on every computer that uses the EPSON Stylus C80 printer. This software controls print settings, lets you monitor the printer's status, and provides several utilities for printer maintenance. For instructions on using your printer driver, see the Printer Basics book. I EpsonNet Direct Print This software, which sets up a network printer port, must be installed on every Windows Me, 98, or 95 computer that uses the printer. I WP-Admin This utility lets you configure the print server for most network protocols. For most networks, it is the only configuration utility you need to install. I XAdmin32 This utility lets you configure the print server for a Novell® NetWare network and perform more advanced configuration for other protocols. Your print server also comes with a built-in web-based configuration utility, which enables you to change configuration settings from any computer on the wireless network that supports a standard web browser. You must configure the print server using WP-Admin or XAdmin32 before you can use this utility. To use the print server's built-in configuration utility, just start your web browser and enter the print server's IP address in the browser's Address box. For more information about the print server's built-in configuration utility or XAdmin32, visit EPSON's web site at support.epson.com. XAdmin32 also provides on-screen help. 17