Epson Stylus C80WN User Setup Information - Page 27

connection with the same MAC address as printed on the sticker on the back

Get Epson Stylus C80WN - Ink Jet Printer PDF manuals and user guides View all Epson Stylus C80WN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

If WP-Admin fails to pick up a signal from the print server, try holding down the print server's test button for at least five seconds to reset it. The lights go out, then both the green and yellow lights come on briefly. The yellow light remains on when your network has a connection to the print server. If it still fails to pick up a signal, check the solutions beginning on page 42. 2. If WP-Admin picks up a signal from more than one print server, select the connection with the same MAC address as printed on the sticker on the back of your print server. 3. Check the signal strength appearing in the SIGNAL box to make sure you have a link to the print server. If you have a link, click STOP. Then click CONFIGURE. If you see the message Wireless Communication Failed, click OK to close the message. Then click CONFIGURE again. If you continue to see this message, move the print server closer to your computer and access point, if you have one. Also, move it away from large metal objects or other devices that interfere with radio signals, such as cordless phones or microwave ovens. Installing Software and Configuring the Print Server 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Installing Software and Configuring the Print Server
23
If WP-Admin fails to pick up a signal from the print server, try
holding down the print server’s test button for at least five seconds
to reset it. The lights go out, then both the green and yellow lights
come on briefly. The yellow light remains on when your network has
a connection to the print server.
If it still fails to pick up a signal, check the solutions beginning on
page 42.
2.
If WP-Admin picks up a signal from more than one print server, select the
connection with the same MAC address as printed on the sticker on the back of
your print server.
3.
Check the signal strength appearing in the
SIGNAL
box to make sure you have a
link to the print server. If you have a link, click
STOP
. Then click
CONFIGURE
.
If you see the message Wireless Communication Failed, click OK to
close the message. Then click CONFIGURE again. If you continue to
see this message, move the print server closer to your computer
and access point, if you have one. Also, move it away from large
metal objects or other devices that interfere with radio signals, such
as cordless phones or microwave ovens.