Epson Stylus C80WN User Setup Information - Page 34
Setting Up a Network Port on Windows 2000, You see the Add Standard
View all Epson Stylus C80WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
13. If the test page prints, click OK to close the Properties window. If it fails to print, try the following: I Make sure that the printer and print server are connected and that both are on. I Check WP-Admin to make sure you have a signal (see page 22). I Make sure you've entered the correct IP address in step 8. I Make sure you clicked Apply in step 11. Now you're ready to start printing. For instructions, see Printer Basics. Setting Up a Network Port on Windows 2000 Before you begin, run WP-Admin and note the IP address of your print server. Then follow these steps to set up a network port on a computer running Windows 2000: 1. From the Start menu, click Settings > Printers. 2. Right-click the EPSON Stylus C80 Series printer icon, then click Properties. 3. On the Port tab, click Add Port. You see this window: 4. Select Standard TCP/IP Port and click New Port. You see the Add Standard TCP/IP Port wizard. 5. Click Next. 6. In the Printer Name or IP Address box, enter the print server's IP address and click Next. 7. Follow the instructions on the screen to complete the wizard. 8. Click Close to close the Printer Ports window. 9. On the Properties window, click Apply. 30 Installing Software and Configuring the Print Server