Epson Stylus C80WN User Setup Information - Page 30
Remember to enable WEP and reset the wireless mode on your computer, If you're using an access point
View all Epson Stylus C80WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
8. If you want to enable WEP encryption, do the following: I Select either 64BIT or 128BIT in the WEP Key box, depending on which version of WEP your network supports. I Enter your WEP key in either the 128Bit Key 1 box or the 64Bit Key 1 box. You can enter up to four WEP keys on the screen. (Changing your WEP key periodically adds to network security.) To communicate, every node on the network must use the same WEP key. For more information about WEP keys, check the documentation for your wireless adapter or access point, or ask your network administrator. I If you're using an access point, set the Wireless Mode to Infrastructure. (Remember to enable WEP and reset the wireless mode on your computer when you're done configuring the print server.) I Make sure the SSID matches your wireless network's SSID. 9. Make any other changes you want and click OK. When you see the Wireless Server Search window again, click QUIT. 26 Installing Software and Configuring the Print Server