Fujitsu 6240 User Manual - Page 101

Chapter 5 Various Ways to Scan 5.5 Customizing the Scanner Settings Using a Button on the Scanner to Start Scanning The [Scan/Stop] and [Send to] buttons on the operator panel can be configured to perform scanning by simply pressing one of these buttons. To configure this setting, you first need to assign an application to be launched from each button. 5 Click the [Events] tab and select an event. From the [Select an event] drop-down list, select an event from which you want to launch an application. Computer setup 1 Confirm that the scanner is connected to the computer, then turn on the scanner. For details, refer to "Connecting the Cables" in Getting Started. 2 Select the [Start] menu J [Control Panel]. D The [Control Panel] dialog box appears. 3 Click [View devices and printers]. D The [Devices and Printers] dialog box appears. 4 Right-click on the scanner icon, and select [Scan properties] from the displayed menu. D The properties dialog box of the scanner appears. In this function, the following events can be specified: z [Scan Button] (press the [Scan/Stop] button) z [Send to 1] to [Send to 9] (press the [Send to] button while a number from 1 to 9 is displayed on the Function Number Display) TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 101