Fujitsu 6240 User Manual - Page 41
Documents for Scanning (ADF), Paper Size, Conditions
UPC - 097564307270
View all Fujitsu 6240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 2 How to Load Documents 2.3 Documents for Scanning (ADF) Paper Size Conditions The following paper sizes can be scanned. A C Feed direction B Feed direction D Portrait Landscape A: 52 to 216 mm (2.1 to 8.5 in.) B: 74 to 355.6 mm (2.9 to 14.0 in.) (*1) C: 74 to 216 mm (2.9 to 8.5 in.) D: 52 to 355.6 mm (2.1 to 14.0 in.) (*1) *1: Long page scanning supports documents with a length up to 3,048 mm (120 in.). Paper type The following paper types are recommended: z Wood-free paper z Wood-containing paper z PPC paper (recycled) z Plastic card When using paper types other than the above, make sure to test with the same type of paper first to check if the document can be scanned. Paper weight (thickness) The following paper weights can be used: z 41 to 209 g/m² (11 to 56 lb) z 127 to 209 g/m² (34 to 56 lb) for A8 size z 1.4 mm or less for plastic cards (*1) *1: Up to 1.25 mm is supported for scanning at 200 dpi (60 ppm) in landscape when using fi-6140Z/fi-6240Z. This setting can be changed in the Software Operation Panel to scan plastic cards with a thickness up to 1.4 mm. For details, refer to " Scanning Thick Plastic Cards [Feed Mode] (fi-6140Z/fi-6240Z)" (page 179). TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 41