Fujitsu 6240 User Manual - Page 69

Chapter 5 Various Ways to Scan Documents with Different Widths ʂ When you scan a mixed batch with different widths, some of the smaller documents may be skewed or not fed into the ADF. In that case, separate the documents by their widths, and scan them in different batches. For more details about scanning a mixed batch of documents, refer to "Conditions for Mixed Batch Scanning" (page 47). 1 To avoid skewed images and detect the paper size automatically, select [Automatic Page Size Detection] in [Automatic Size and Skew Detection]. For details, refer to "Automatically Correcting Skewed Images" (page 91). 2 Align the top of the documents. ʂ Make sure that all documents are placed underneath the pick roller. Otherwise, some documents may be skewed or not fed into the ADF. Pick roller's width Good Pick roller's width TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan 3 Place the documents at the center of the ADF paper chute, and adjust the side guides to the widest document in the batch. For details, refer to "Chapter 2 How to Load Documents" (page 37). Bad 4 Scan the document by selecting the [Scan] menu J [Scan] in ScandAll PRO. Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 69