Fujitsu 6240 User Manual - Page 76

Chapter 5 Various Ways to Scan Long Page Scanning Documents with a length up to 3,048 mm (120 in.) can be scanned by long page scanning. 1 Load the document in the ADF paper chute. For details, refer to "Chapter 2 How to Load Documents" (page 37). ʂ z Long page documents should be loaded one sheet at a time in the ADF paper chute. z When you scan long pages, take note of the following. - Loading Hold the document with your hand so it does not fall out of the ADF paper chute. - Removing Secure enough space around the stacker to prevent the ejected sheet from falling off the stacker. To scan documents longer than A4/Letter size, perform the following: z Pull out the chute extensions all the way. For details, refer to "1.6 Setting Up the ADF Paper Chute" (page 26). z Lift the stacker and stacker extension towards you. For details, refer to "1.7 Setting Up the Stacker" (page 27). 2 Start up ScandAll PRO and select the [Scan] menu J [Scanner Setting]. D The [TWAIN Driver (32)] dialog box appears. If the [TWAIN Driver (32)] dialog box does not appear, check the setting in ScandAll PRO by selecting the [Tool] menu J [Preferences] to open the [Setup] dialog box, then confirm that [TWAIN] is selected for [Device Driver] in the [Scan] tab. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 76