Fujitsu 6240 User Manual - Page 90
Feeding Documents Manually in the ADF
UPC - 097564307270
View all Fujitsu 6240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Chapter 5 Various Ways to Scan Feeding Documents Manually in the ADF Documents can also be loaded manually one sheet at a time in the ADF. Normally, in automatic feeding, the scanner stops scanning once all the documents loaded in the ADF paper chute have been scanned. In manual feeding, the scanner waits for the next document to be loaded within a specified time. Scanning will continue as long as another document is loaded within the set time, and stops if no document is loaded. By using this method, you can perform scanning as you check the documents one by one. Manual feeding is effective in the following cases. z To scan as you check the contents of each sheet. z To scan documents that cause multifeed or paper jam when loaded together in the same batch. z To continue scanning documents such as magazine/newspaper clippings that cannot be loaded together. 1 Enable manual feeding in the Software Operation Panel. For details, refer to "Waiting Time in Manual Feed Mode [Manual-feed timeout]" (page 186). 2 Load a document in the ADF paper chute. For details, refer to "Chapter 2 How to Load Documents" (page 37). 3 Scan the document by selecting the [Scan] menu J [Scan] in ScandAll PRO. D After the document is scanned, the rollers inside the ADF keep rotating, waiting for the next document to be loaded for the time specified in the Software Operation Panel. 4 Load the next document in the ADF paper chute. D The document is scanned. 5 Repeat step 4 until all documents are scanned. D Scanning will stop if no document is loaded within the set time. z Pressing the [Send to] button on the operator panel will stop the scan immediately. z When [Manual-feed timeout] is enabled, the scanner will wait for the set time even if you start scanning with no document in the ADF paper chute. z When you use manual feeding frequently, replacement cycle of the consumables may be shortened. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 90