Fujitsu 6240 User Manual - Page 161
Operational, Settings, Description, Parameter/Value, Factory Default
UPC - 097564307270
View all Fujitsu 6240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Chapter 9 Operational Settings Item Page Counter (page 166) Power saving (page 187) Offset Setting (page 169) Vertical magnification Adjustment (page 169) Description Parameter/Value Factory Default Check the counters to determine when to replace the consumables. Also use it to reset the counters after replacing the consumables. Total Page Count(ADF) / Total Page Count(FB) (*1) 0 / Brake Roller / Pick Roller Remaining Ink (*2) Specify the waiting time before entering power saving mode. Range: 5 to 235 min. (in increments of 5) 15 min. Adjust the position to start the scan on the selected scanning side(s). Unit: Flat bed (*1) / ADF(front) / ADF(back) Main/Sub: -2 to +2 mm (in increments of 0.5) Main/Sub: 0 mm Adjust the magnification level in feed direction for Unit: Flat bed (*1) / ADF 0% the selected scanning method. Range: -3.1 to 3.1% (in increments of 0.1) *1: Displayed when using the fi-6230Z or fi-6240Z. *2: Displayed when the imprinter is installed. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing the Consumables Troubleshooting Operational Settings Appendix Glossary 161