Garmin D2 Mach 1 Owners Manual PDF - Page 31

7 Enter a wind direction in degrees and select Done. The wind value is added to the list. Only wind values included in the list are used in calculations. 8 Repeat steps 5-7 for each available altitude. Resetting Wind Information 1 Press START. 2 Select Jumpmaster. 3 Select HAHO or HALO. 4 Select Wind > Reset. All wind values are removed from the list. Entering Wind Information for a Static Jump 1 Press START. 2 Select Jumpmaster > Static > Wind. 3 Enter a wind speed in knots and select Done. 4 Enter a wind direction in degrees and select Done. Constant Settings Select Jumpmaster, select a jump type, and select Constant. Percent Max.: Sets the jump range for all jump types. A setting less than 100% decreases the drift distance to the DIP, and a setting greater than 100% increases the drift distance. More experienced jumpmasters may want to use smaller numbers, and less experienced skydivers may want to use larger numbers. Safety Factor: Sets the margin of error for a jump (HAHO only). Safety factors are usually integer values of two or greater, and are determined by the jumpmaster based on specifications for the jump. K-Freefall: Sets the wind drag value for a parachute during freefall, based on the parachute canopy rating (HALO only). Each parachute should be labeled with a K value. K-Open: Sets the wind drag value for an open parachute, based on the parachute canopy rating (HAHO and HALO). Each parachute should be labeled with a K value. K-Static: Sets the wind drag value for a parachute during a static jump, based on the parachute canopy rating (Static only). Each parachute should be labeled with a K value. Customizing Activities and Apps You can customize the activities and apps list, data screens, data fields, and other settings. Adding or Removing a Favorite Activity The list of your favorite activities appears when you press START from the watch face, and it provides quick access to the activities you use most frequently. You can add or remove favorite activities at any time. 1 Hold MENU. 2 Select Activities & Apps. Your favorite activities appear at the top of the list. 3 Select an option: • To add a favorite activity, select the activity, and select Set as Favorite. • To remove a favorite activity, select the activity, and select Remove from Favorites. Changing the Order of an Activity in the Apps List 1 Hold MENU. 2 Select Activities & Apps. 3 Select an activity. 4 Select Reorder. 5 Press UP or DOWN to adjust the position of the activity in the apps list. Customizing the Data Screens You can show, hide, and change the layout and content of data screens for each activity. 1 Hold MENU. 2 Select Activities & Apps. 3 Select the activity to customize. 4 Select the activity settings. 5 Select Data Screens. 6 Select a data screen to customize. 7 Select an option: • Select Layout to adjust the number of data fields on the data screen. • Select Data Fields, and select a field to change the data that appears in the field. TIP: For a list of all the available data fields, go to Data Fields, page 82. Not all data fields are available for all activity types. • Select Reorder to change the location of the data screen in the loop. • Select Remove to remove the data screen from the loop. 8 If necessary, select Add New to add a data screen to the loop. You can add a custom data screen, or select one of the predefined data screens. Adding a Map to an Activity You can add the map to the data screens loop for an activity. 1 Hold MENU. 2 Select Activities & Apps. 3 Select the activity to customize. 4 Select the activity settings. 5 Select Data Screens > Add New > Map. Activities and Apps 23