Garmin Tacx NEO Bike Smart Trainer Owners Manual - Page 14

2. Assembly The NEO Bike is packed in the following parts: 1. T8001.50 Frame 2. T8003 Front leg (A4) 3. T8002 Rear leg (A7) 4. T8011.50 Saddle, mounted on rail (D1-D3) 5. T8010.50 Control panel with handlebars (B3, B4, C1-C3 & C6-C9) 6. T8010.51 Air fans (B1 & B2) 7. T8015.07 Rubber mat 8. T8010.16 Tablet mount 9. T8017 Gift box with bottle cage (A1) 10. T8015 Assembly box Please assemble the trainer as instructed and with at least two persons. Consult the part list on page 2 and the assembly manual. First remove all packaging and check if everything is in the package. A. MOUNT THE LEGS AND PLACE THE TRAINER 1. Place the bike on the floor and tilt it to the back or front to mount the legs. Please carefully lift the trainer, it is heavy (50 kg). 2. Mount the front legs (A4) with the two bolts T8015.02 and T8015.03 and fix with an 8 mm allen key. 3. Mount the rear leg (A7) with the two bolts T8015.01 and fix with an 8 mm allen key. 4. Place the trainer on a firm, level surface. Please carefully lift the trainer, it is very heavy (50 kg). 5. Stabilize the trainer by leveling the front legs with the adjustable feet (A5). a. Start with one side and turn the button left to shorten or to the right to lengthen the leg. b.Do the same for the other side. c. Continue until the bike stands completely stable on the floor. B. MOUNT YOUR PEDALS 6. Select the needed pedal-insert, the left and right inserts differ (L = left, R = right) 7. Grease the insert. 8. Mount the pedal with the required insert onto the axle. 9. Fix the pedal by rotating it in the correct direction. C. MOUNT THE BOTTLE CAGE 10. Mount the cage with an allen key 4 mm. D. MOUNT THE SADDLE 11. Place the cap T8010.05 in the saddle rail (D3). 12. Slide the saddle (D1) on to the saddle rail (D3). 13. Fix the saddle on the required height and distance with bolts D6 (height) and D4 (distance) with a 6 and 8 mm allen key. Or replace the bolts by the handles T8015.15 and T8015.16. Max. height is 26 cm and max. distance is 15 cm, please do not exceed this limit. Consult the correct posture on page 8. 14. Set the saddle angle with bolt D2 and a 5 mm allen key. When this icon is shown, the step is to be conducted with at least two persons. - 12 -