HP 3050 HP LaserJet 3050/3052/3055/3390/3392 All-in-One - Software Technical R - Page 254
Confirm Get Community name, Get Community name
UPC - 882780147096
View all HP 3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
● Confirm Get Community name: Retype the SNMP Get Community Name (password) to allow SNMP information to be read from the HP LaserJet all-in-one. ● Disable SNMP v1 default Get Community name of "public". Select this option to disable the default Get community name "public". If you select this option, you will need to type values in the Get Community name and Confirm Get Community name fields. ● Enable SNMP v1 read-only access (uses "public" for the Get Community value). Select this option to enable the SNMP V1 agents on the HP LaserJet all-in-one, but limit access to read-only. Write-access is disabled. The default Get Community name "public" is automatically enabled. ● Disable SNMP v1. Select this option to disable the SNMP V1 agents on the HP LaserJet all-inone, which is recommended for secure environments. If SNMP V1 is disabled, some port monitors or discovery utilities might not operate properly. NOTE You must click Apply for your changes to take effect. Network Configuration The Network Configuration screen provides an overview of the network settings that have been enabled for the HP LaserJet all-in-one. Figure 5-47 Network Configuration screen - 1 of 3 232 Chapter 5 The HP ToolboxFX ENWW