HP 400N HP JetDirect 400N Print Server Hardware Installation Guide - 5969-3587 - Page 15
Installing the HP JetDirect Print Server Card, Task 1. If you have a Token Ring card
UPC - 088698733714
View all HP 400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2 Installation 2 Installing the HP JetDirect Print Server Card Task 1. If you have a Token Ring card, set the Data-Rate switch (if necessary) Before installing a Token Ring card, you must set the data-rate switch to either 4 Mbit/second or 16 Mbit/second (factory default). The selected setting depends on the data-rate operation of your Token Ring network. 1. Locate the Data-Rate switch on the Token Ring print server card. 2. Set the switch to 4 Mbit/s or 16 Mbit/s. Note: when switches are pressed toward the "Open" position, they are in the 16 Mbit/s setting. 16 Mbit/s 4 Mbit/s position Installing the HP JetDirect Print Server Card 2-1
Installing the HP JetDirect Print Server Card 2-1
2
Installation
2
Installing the HP JetDirect Print
Server Card
Task 1. If you have a Token Ring card, set
the Data-Rate switch (if necessary)
Before installing a Token Ring card, you must set the data-rate
switch to either 4 Mbit/second or 16 Mbit/second (factory default).
The selected setting depends on the data-rate operation of your
Token Ring network.
1.
Locate the Data-Rate switch on the Token Ring print
server card.
2.
Set the switch to 4 Mbit/s or 16 Mbit/s.
Note: when switches are pressed toward the
“
Open
”
position,
they are in the 16 Mbit/s setting.
16 Mbit/s
4 Mbit/s position