HP 400N HP JetDirect 400N Print Server Hardware Installation Guide - 5969-3587 - Page 63
HP2500C/CM Professional Series and DesignJet ColorPro GA Control Panel
UPC - 088698733714
View all HP 400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
HP 2500C/CM Professional Series and DesignJet ColorPro GA Control Panel To enable or disable network protocols 1. Take the printer offline by pressing the online/offline button . 2. Press [Menu] repeatedly until MIO MENU appears. 3. Press [Item]. CONFIGURE MIO appears. 4. Press [Select]. CFG NETWORK NO appears. This message does not mean that you must reconfigure your protocol. It means only that you do not intend to access the network configuration menus. 5. Press [Value] to display CFG NETWORK YES . Then press [Select]. 6. Press [Item] to scroll through each network protocol until the one you want to change is displayed. 7. To change the protocol status, press [Value] and then press [Select]. 8. Press [Item] to continue to the next protocol. Example: To enable the DLC/LLC protocol, press [Item] until the control panel displays either DLC/LLC ON or DLC/LLC OFF. If DLC/LLC ON is displayed, press [Item] to retain that protocol and continue to the next protocol. If DLC/LLC OFF is displayed, press [Value] to display DLC/ LLC ON and then press [Select]. Then press [Item] again to continue to the next protocol. 9. To activate the printer and save your changes, press the online/ offline button . To complete the print server configuration, see the HP JetDirect software installation guide included with the product. Using the Control Panel for Printers 3-15 Printer Control 3 Panel