HP 400N HP JetDirect 400N Print Server Hardware Installation Guide - 5969-3587 - Page 61

Cfg Network=yes, Cfg Etalk=no, Cfg Etalk=yes, Etalk Phase=1, Etalk Phase=2

Get HP 400N - JetDirect MIO Print Server PDF manuals and user guides
UPC - 088698733714
View all HP 400N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

4. Change the message to CFG NETWORK=YES* using the following buttons: 5 Series and 5Si Series printers Press [+], then [Select] Other printers Press [+], then [Enter] 5. Press [Item] until CFG ETALK=NO* appears. 6. Change this to CFG ETALK=YES* by pressing [+], and then pressing [Select] or [Enter] depending on your printer model. 7. Press [Item]. ETALK PHASE=1* or ETALK PHASE=2* appears on the control panel. • The asterisk (*) indicates the active phase setting. • To change the phase setting, press [+] until the phase setting that you desire appears, then press [Select] or [Enter] depending on your printer model. Be sure "*" appears alongside your selection. 8. To activate the printer and save your changes, press [On Line] (for LaserJet 5 Series printers, press [Go]). To complete the print server configuration, see the HP JetDirect software installation guide included with the product. Printer Control 3 Panel Using the Control Panel for Printers 3-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Using the Control Panel for Printers 3-13
3
Printer Control
Panel
4.
Change the message to
CFG NETWORK=YES*
using the following
buttons:
5.
Press
[Item]
until
CFG ETALK=NO*
appears.
6.
Change this to
CFG ETALK=YES*
by pressing
[+]
, and then
pressing
[Select]
or
[Enter]
depending on your printer model.
7.
Press
[Item]
.
ETALK PHASE=1*
or
ETALK PHASE=2*
appears
on the control panel.
•
The asterisk (
*
) indicates the active phase setting.
•
To change the phase setting, press
[+]
until the phase setting
that you desire appears, then press
[Select]
or
[Enter]
depending on your printer model. Be sure
“
*
”
appears
alongside your selection.
8.
To activate the printer and save your changes, press
[On°Line]
(for LaserJet 5 Series printers, press
[Go]
).
To complete the print server configuration, see the HP JetDirect
software installation guide
included with the product.
5 Series and 5Si Series printers
Press
[+]
, then
[Select]
±
Other printers
Press
[+]
, then
[Enter]
±