HP 400N HP JetDirect 400N Print Server Hardware Installation Guide - 5969-3587 - Page 71
To enable or disable network protocols on the, DesignJet 600 Series printers, HP DesignJet
UPC - 088698733714
View all HP 400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
To enable or disable network protocols on the DesignJet 600 Series printers 1. Turn on the printer. 2. Verify that the printer displays STATUS and Ready to plot. 3. Press [Enter] until MENUS (FULL MENUS on the 650C printer) and Plot mgmt → appear. 4. Press ↑ repeatedly until MENUS and I/O setup→ appear. 5. Press [Enter] to access the MIO slot. I/O SETUP and Modular→ appear. 6. Press [Enter]. MIO SETUP and CFG NETWORK=NO→ appear. 7. To access the network configuration menu, press [Enter] to display CFG NETWORK and NO*. 8. Press ↑ to display: CFG NETWORK and YES. 9. Press [Enter]. MIO SETUP and CFG NETWORK=YES→ appear. You can now access the network configuration menu. 10. Press ↑ to display MIO SETUP and NETWORK=. 11. Press [Enter]. * appears. An* next to a protocol denotes the current value. 12. Press ↑ repeatedly to scroll through the configuration options. When the protocol you wish to select is displayed, press [Enter] to save it. MIO SETUP and NETWORK= appear. 13. Press [Previous] until Ready to plot is displayed. The printer is configured for the selected protocol. Remember, if you enable a single protocol on the 600 Series printers, other protocols are turned off. You can restore default values by performing a cold reset on your printer. Control Panel for Large-Format Printers 4-3 HP DesignJet 4 Control Panel