HP 400N HP JetDirect 400N Print Server Hardware Installation Guide - 5969-3587 - Page 80

BOOTP=NO, IP BYTE=0, TIMEOUT, STATUS Ready, Enter], Previous]

Get HP 400N - JetDirect MIO Print Server PDF manuals and user guides
UPC - 088698733714
View all HP 400N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

• If you select BOOTP=NO→, the printer is configured to accept TCP/IP parameters from the control panel. Continue with step 4. 4. If you selected BOOTP=NO→, press ↑ to configure each TCP/IP parameter. For example, to configure the IP address: a. Press ↑ until IP BYTE=0 is displayed. Press [Enter]. b. Press ↑ or ↓ to select the number (0-255) for that byte, then press [Enter]. c. Press ↑ to select the next byte. d. Continue the same process until all bytes are entered. Note that a valid IP address is required for proper operation. 5. If appropriate, configure the subnet mask bytes (SM), syslog server IP address (LG), default gateway (GW), and timeout (TIMEOUT) in the same manner. The TIMEOUT parameter default is 90 seconds. Up to 3600 seconds can be configured. If set to "0", the timeout feature of the HP JetDirect card is disabled-TCP/IP connections remain open until closed by the server. 6. To save the configuration, press the ↑ and ↓ keys simultaneously. A configuration page will print. Your configuration is now active. 7. Press [Previous] until the STATUS Ready is displayed. To manually configure other parameters, see the appropriate sections in this chapter. To complete the print server configuration, see the HP JetDirect software installation guide included with the product. 4-12 Control Panel for Large-Format Printers

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
4-12
Control Panel for Large-Format Printers
•
If you select
BOOTP=NO
→,
the printer is configured to
accept TCP/IP parameters from the control panel.
Continue with step 4.
4.
If you selected
BOOTP=NO
→
, press
↑
to configure each TCP/IP
parameter. For example, to configure the IP address:
a. Press
↑
until
IP BYTE=0
is displayed. Press
[Enter]
.
b. Press
↑
or
↓
to select the number (0-255) for that byte, then
press
[Enter]
.
c. Press
↑
to select the next byte.
d. Continue the same process until all bytes are entered.
Note that a valid IP address is required for proper operation.
5.
If appropriate, configure the subnet mask bytes (
SM
), syslog
server IP address (
LG
), default gateway (
GW
), and timeout
(
TIMEOUT
) in the same manner.
The
TIMEOUT
parameter default is 90 seconds. Up to
3600 seconds can be configured. If set to
“
0
”
, the timeout
feature of the HP JetDirect card is disabled
—
TCP/IP
connections remain open until closed by the server.
6.
To save the configuration, press the
↑
and
↓
keys
simultaneously. A configuration page will print. Your
configuration is now active.
7.
Press
[Previous]
until the
STATUS Ready
is displayed.
To manually configure other parameters, see the appropriate
sections in this chapter.
To complete the print server configuration, see the HP JetDirect
software installation guide
included with the product
.