HP 400N HP JetDirect 400N Print Server Hardware Installation Guide - 5969-3587 - Page 65
Printer Control, Panel, CAUTION, Select], Value], Item], Menu]
UPC - 088698733714
View all HP 400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4. Press [Select]. CFG NETWORK NO appears. This message does not mean that you must reconfigure your protocol. It means only that you do not intend to access the network configuration menus. 5. Press [Value] to display CFG NETWORK YES . Then press [Select]. 6. Press [Item] until CFG IPX/SPX NO appears. 7. Press [Value] to display CFG IPX/SPX YES. Then press [Select]. 8. Press [Item] until SRC RT appears. To change source routing, press [Value] until the source routing that you desire appears, then press [Select]. 9. To activate the printer and save your changes, press the online/ offline button . To complete the print server configuration, see the HP JetDirect software installation guide included with the product. Configuring TCP/IP Parameters If you have not already done so, enable TCP/IP (TCP/IP ON) by following the instructions described above. CAUTION Enter data carefully. If you make an incorrect entry, you may need to restart the procedure. 1. Take the printer offline by press the online/offline button . 2. Press [Menu] repeatedly until MIO MENU appears. 3. Press [Item]. CONFIGURE MIO appears. 4. Press [Select]. CFG NETWORK NO appears. This message does not mean that you must reconfigure your protocol. It means only that you do not intend to access the network configuration menus. 5. Press [Value] to display CFG NETWORK YES. Then press [Select]. 6. Press [Item] until CFG TCP/IP NO appears. Printer Control 3 Panel Using the Control Panel for Printers 3-17