HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Configuration Guide - Page 25

Defining a traffic behavior, Defining a QoS policy

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Option service-vlan-id vlan-id-list source-mac mac-address Description Matches the service provider VLAN IDs (SVLANs). The vlan-id-list argument is in the format of vlan-id-list = { vlan-id | vlan-id1 to vlan-id2 }&, where the vlan-id, vlan-id1, and vlan-id2 arguments represent the VLAN IDs and each are in the range of 1 to 4094, vlan-id1 must be no greater than vlan-id2, and & indicates that you can specify up to 10 VLAN IDs or VLAN ID ranges. Matches a source MAC address. Defining a traffic behavior A traffic behavior is a set of QoS actions (such as traffic filtering, shaping, policing, and priority marking) to take on a traffic class of traffic. To define a traffic behavior: Step 1. Enter system view. Command system-view 2. Create a traffic behavior and enter traffic behavior view. traffic behavior behavior-name See the subsequent chapters, 3. Configure actions in the traffic depending on the purpose of the behavior. traffic behavior: traffic policing, traffic filtering, priority marking, traffic accounting, and so on. Remarks N/A By default, no traffic behavior is configured. By default, no action is configured for a traffic behavior. Defining a QoS policy You associate a traffic behavior with a traffic class in a QoS policy to perform the actions that are defined in the traffic behavior for the traffic class of packets. When an ACL is referenced by a QoS policy for traffic classification, the action (permit or deny) in the ACL is ignored, and the actions in the associated traffic behavior are performed. To associate a traffic class with a traffic behavior in a QoS policy: Step 1. Enter system view. 2. Create a QoS policy and enter QoS policy view. Command system-view qos policy policy-name Remarks N/A By default, no QoS policy is configured. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
19
Option
Description
service-vlan-id
vlan-id-list
Matches the service provider VLAN IDs (SVLANs).
The
vlan-id-list
argument is in the format of
vlan-id-list
= {
vlan-id
|
vlan-id1
to
vlan-id2
}&<1-10>, where the
vlan-id, vlan-id1,
and
vlan-id2
arguments
represent the VLAN IDs and each are in the range of 1 to 4094,
vlan-id1
must be no greater than
vlan-id2
, and &<1-10>
indicates that you can
specify up to 10 VLAN IDs or VLAN ID ranges.
source-mac
mac-address
Matches a source MAC address.
Defining a traffic behavior
A traffic behavior is a set of QoS actions (such as traffic filtering, shaping, policing, and priority marking)
to take on a traffic class of traffic.
To define a traffic behavior:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a traffic behavior and
enter traffic behavior view.
traffic behavior
behavior-name
By default, no traffic behavior is
configured.
3.
Configure actions in the traffic
behavior.
See the subsequent chapters,
depending on the purpose of the
traffic behavior: traffic policing,
traffic filtering, priority marking,
traffic accounting, and so on.
By default, no action is configured
for a traffic behavior.
Defining a QoS policy
You associate a traffic behavior with a traffic class in a QoS policy to perform the actions that are defined
in the traffic behavior for the traffic class of packets.
When an ACL is referenced by a QoS policy for traffic classification, the action (permit or deny) in the
ACL is ignored, and the actions in the associated traffic behavior are performed.
To associate a traffic class with a traffic behavior in a QoS policy:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create a QoS policy and
enter QoS policy view.
qos policy
policy-name
By default, no QoS policy is
configured.