HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Configuration Guide - Page 53
Configuration example, Network requirements, Configuration procedure, Configuring WFQ queuing
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Step 1. Enter system view. 2. Enter interface view. 3. (Optional.) Enable WRR queuing. 4. Configure group-based WRR queuing. Command Remarks system-view N/A interface interface-type interface-number N/A qos wrr { byte-count | weight } The default queuing algorithm on an interface is byte-count WRR queuing. qos wrr queue-id group { 1 | 2 } { byte-count | weight } schedule-value Select an approach according to the WRR queuing type. By default, all queues are in group 1, and the weights of queues 0 through 7 are 1, 2, 3, 4, 5, 9, 13, and 15, respectively. Configuration example Network requirements Enable packet-based WRR on port Ten-GigabitEthernet 1/1/5, assign queues 0 through 3 to WRR group 1, with their weights being 1, 2, 4, 6, respectively, and assign queues 4 through 7 to WRR group 2, with their weights being 1, 2, 4, 6, respectively. Configuration procedure # Enter system view. system-view # Configure WRR queuing on Ten-GigabitEthernet 1/1/5. [Sysname] interface Ten-GigabitEthernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr weight [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 0 group 1 weight 1 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 1 group 1 weight 2 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 2 group 1 weight 4 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 3 group 1 weight 6 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 4 group 2 weight 1 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 5 group 2 weight 2 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 6 group 2 weight 4 [Sysname-Ten-GigabitEthernet1/1/5] qos wrr 7 group 2 weight 6 Configuring WFQ queuing Configuration procedure To configure WFQ queuing: Step 1. Enter system view. 2. Enter interface view. Command system-view interface interface-type interface-number Remarks N/A N/A 47