HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Configuration Guide - Page 78

Network diagram, Create a QoS policy named

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Figure 20 Network diagram Configuration procedure # Create basic ACL 2000, and configure a rule to match packets with source IP address 2.1.1.1. system-view [DeviceA] acl number 2000 [DeviceA-acl-basic-2000] rule permit source 2.1.1.1 0 [DeviceA-acl-basic-2000] quit # Create basic ACL 2001, and configure a rule to match packets with source IP address 2.1.1.2. [DeviceA] acl number 2001 [DeviceA-acl-basic-2001] rule permit source 2.1.1.2 0 [DeviceA-acl-basic-2001] quit # Create a traffic class named classifier_1, and use ACL 2000 as the match criterion in the traffic class. [DeviceA] traffic classifier classifier_1 [DeviceA-classifier-classifier_1] if-match acl 2000 [DeviceA-classifier-classifier_1] quit # Create a traffic class named classifier_2, and use ACL 2001 as the match criterion in the traffic class. [DeviceA] traffic classifier classifier_2 [DeviceA-classifier-classifier_2] if-match acl 2001 [DeviceA-classifier-classifier_2] quit # Create a traffic behavior named behavior_1, and configure the action of redirecting traffic to Ten-GigabitEthernet 1/0/2. [DeviceA] traffic behavior behavior_1 [DeviceA-behavior-behavior_1] redirect interface ten-gigabitethernet 1/0/2 [DeviceA-behavior-behavior_1] quit # Create a traffic behavior named behavior_2, and configure the action of redirecting traffic to Ten-GigabitEthernet 1/0/3. [DeviceA] traffic behavior behavior_2 [DeviceA-behavior-behavior_2] redirect interface ten-gigabitethernet 1/0/3 [DeviceA-behavior-behavior_2] quit # Create a QoS policy named policy, associate traffic class classifier_1 with traffic behavior behavior_1, and associate traffic class classifier_2 with traffic behavior behavior_2 in the QoS policy. [DeviceA] qos policy policy [DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1 [DeviceA-qospolicy-policy] classifier classifier_2 behavior behavior_2 [DeviceA-qospolicy-policy] quit # Apply the QoS policy policy to the incoming traffic of Ten-GigabitEthernet 1/0/1. 72

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
72
Figure 20
Network diagram
Configuration procedure
# Create basic ACL 2000, and configure a rule to match packets with source IP address 2.1.1.1.
<DeviceA> system-view
[DeviceA] acl number 2000
[DeviceA-acl-basic-2000] rule permit source 2.1.1.1 0
[DeviceA-acl-basic-2000] quit
# Create basic ACL 2001, and configure a rule to match packets with source IP address 2.1.1.2.
[DeviceA] acl number 2001
[DeviceA-acl-basic-2001] rule permit source 2.1.1.2 0
[DeviceA-acl-basic-2001] quit
# Create a traffic class named
classifier_1
, and use ACL 2000 as the match criterion in the traffic class.
[DeviceA] traffic classifier classifier_1
[DeviceA-classifier-classifier_1] if-match acl 2000
[DeviceA-classifier-classifier_1] quit
# Create a traffic class named
classifier_2
, and use ACL 2001 as the match criterion in the traffic class.
[DeviceA] traffic classifier classifier_2
[DeviceA-classifier-classifier_2] if-match acl 2001
[DeviceA-classifier-classifier_2] quit
# Create a traffic behavior named
behavior_1
, and configure the action of redirecting traffic to
Ten-GigabitEthernet 1/0/2.
[DeviceA] traffic behavior behavior_1
[DeviceA-behavior-behavior_1] redirect interface ten-gigabitethernet 1/0/2
[DeviceA-behavior-behavior_1] quit
# Create a traffic behavior named
behavior_2
, and configure the action of redirecting traffic to
Ten-GigabitEthernet 1/0/3.
[DeviceA] traffic behavior behavior_2
[DeviceA-behavior-behavior_2] redirect interface ten-gigabitethernet 1/0/3
[DeviceA-behavior-behavior_2] quit
# Create a QoS policy named
policy
, associate traffic class
classifier_1
with traffic behavior
behavior_1
,
and associate traffic class
classifier_2
with traffic behavior
behavior_2
in the QoS policy.
[DeviceA] qos policy policy
[DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1
[DeviceA-qospolicy-policy] classifier classifier_2 behavior behavior_2
[DeviceA-qospolicy-policy] quit
# Apply the QoS policy
policy
to the incoming traffic of Ten-GigabitEthernet 1/0/1.