HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Configuration Guide - Page 75
Configuring PE 2, to the incoming traffic of the downlink port Ten-GigabitEthernet 1/1/5. - uplinks
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
[PE1-Ten-GigabitEthernet1/1/5] port hybrid vlan 100 untagged # Apply QoS policy test to the incoming traffic of the downlink port Ten-GigabitEthernet 1/1/5. [PE1-Ten-GigabitEthernet1/1/5] qos apply policy test inbound [PE1-Ten-GigabitEthernet1/1/5] quit # Configure the uplink port Ten-GigabitEthernet 1/1/6 as a trunk port, and assign it to VLAN 100. [PE1] interface ten-gigabitethernet 1/1/6 [PE1-Ten-GigabitEthernet1/1/6] port link-type trunk [PE1-Ten-GigabitEthernet1/1/6] port trunk permit vlan 100 [PE1-Ten-GigabitEthernet1/1/6] quit Configuring PE 2 Configure PE 2 in the same way PE 1 is configured. 69
69
[PE1-Ten-GigabitEthernet1/1/5] port hybrid vlan 100 untagged
# Apply QoS policy
test
to the incoming traffic of the downlink port Ten-GigabitEthernet 1/1/5.
[PE1-Ten-GigabitEthernet1/1/5] qos apply policy test inbound
[PE1-Ten-GigabitEthernet1/1/5] quit
# Configure the uplink port Ten-GigabitEthernet 1/1/6 as a trunk port, and assign it to VLAN 100.
[PE1] interface ten-gigabitethernet 1/1/6
[PE1-Ten-GigabitEthernet1/1/6] port link-type trunk
[PE1-Ten-GigabitEthernet1/1/6] port trunk permit vlan 100
[PE1-Ten-GigabitEthernet1/1/6] quit
Configuring PE 2
Configure PE 2 in the same way PE 1 is configured.