HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Configuration Guide - Page 84
Network diagram, Command, Remarks, classifier_1, behavior_1, policy
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Step 12. Display traffic accounting configuration. Command • display qos policy control-plane slot slot-number [ inbound | outbound ] • display qos policy global [ slot slot-number ] [ inbound | outbound ] • display qos policy interface [ interface-type interface-number ] [ inbound | outbound ] • display qos vlan-policy { name policy-name | vlan [ vlan-id ] } [ slot slot-number ] [ inbound | outbound ] Remarks Available in any view. Configuration example Network requirements As shown in Figure 22, configure class-based accounting to collect statistics on the number of packets that Ten-GigabitEthernet 1/1/5 receive from 1.1.1.1/24. Figure 22 Network diagram Configuration procedure # Create basic ACL 2000, and configure a rule to match packets with source IP address 1.1.1.1. system-view [DeviceA] acl number 2000 [DeviceA-acl-basic-2000] rule permit source 1.1.1.1 0 [DeviceA-acl-basic-2000] quit # Create a traffic class named classifier_1, and use ACL 2000 as the match criterion in the traffic class. [DeviceA] traffic classifier classifier_1 [DeviceA-classifier-classifier_1] if-match acl 2000 [DeviceA-classifier-classifier_1] quit # Create a traffic behavior named behavior_1, and configure the class-based accounting action. [DeviceA] traffic behavior behavior_1 [DeviceA-behavior-behavior_1] accounting packet [DeviceA-behavior-behavior_1] quit # Create a QoS policy named policy, and associate traffic class classifier_1 with traffic behavior behavior_1 in the QoS policy. [DeviceA] qos policy policy [DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1 [DeviceA-qospolicy-policy] quit 78