HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Configuration Guide - Page 52
Configuration approaches and task list, Configuring SP queuing, Configuration procedure
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
queue in a WFQ group and then the traffic beyond the minimum guaranteed bandwidths for the queues in the WFQ group according to the configured weights. The two WFQ groups are scheduled at a 1:1 ratio. Configuration approaches and task list Tasks at a glance (Required.) Perform one of the following tasks to configure per-queue congestion management: • Configuring SP queuing • Configuring WRR queuing • Configuring WFQ queuing • Configuring SP+WRR queuing • Configuring SP+WFQ queuing Configuring SP queuing Configuration procedure To configure SP queuing: Step 1. Enter system view. 2. Enter interface view. Command system-view interface interface-type interface-number 3. Configure SP queuing. qos sp Remarks N/A N/A The default queuing algorithm on an interface is WRR queuing. Configuration example Configure Ten-GigabitEthernet 1/1/5 to use SP queuing: # Enter system view system-view # Configure Ten-GigabitEthernet 1/1/5 to use SP queuing. [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] qos sp Configuring WRR queuing Configuration procedure To configure WRR queuing: 46