HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Configuration Guide - Page 89
Setting the fixed-area ratio for a queue, Applying data buffer configuration, Value of ratio-value
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Value of ratio-value 8 to 16 17 to 29 30 to 42 43 to 60 61 to 76 77 to 86 89 to 100 Effective value 11 20 33 50 67 80 89 Setting the fixed-area ratio for a queue By default, all queues have an equal share of the fixed area. This task allows you to change the fixed-area ratio for a specific queue. The other queues equally share the remaining part. The fixed-area space for a queue cannot be used by other queues. Therefore, it is also called the minimum guaranteed buffer for the queue. The sum of ratios configured for queues cannot be greater than or equal to 100%, and queues 5, 6, and 7 must have available fixed area space. To set the fixed-area ratio for a specific queue: Step 1. Enter system view. 2. Set the fixed-area ratio for a specific queue. Command Remarks system-view N/A buffer egress [ slot slot-number ] cell queue The default setting is 13% queue-id guaranteed ratio ratio for all queues. Applying data buffer configuration Perform this task to apply the data buffer configuration. You cannot directly modify the applied configuration. To modify the configuration, you must cancel the application, re-configure data buffers, and re-apply the configuration. To apply data buffer configuration: Step 1. Enter system view. 2. Apply data buffer configuration. Command system-view buffer apply 83