HP 6125XLG R2306-HP 6125XLG Blade Switch IRF Configuration Guide - Page 41

Assign Ten-GigabitEthernet 1/0/1

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

You need to assign a domain ID (range: 0-4294967295) [Current domain is: 1]: The assigned domain ID is: 1 Info: MAD LACP only enable on dynamic aggregation interface. [Sysname-Bridge-Aggregation2] quit # Assign Ten-GigabitEthernet 1/1/5, Ten-GigabitEthernet 2/1/5, Ten-GigabitEthernet 3/1/5, and Ten-GigabitEthernet 4/1/5 to the aggregate interface. [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] port link-aggregation group 2 [Sysname-Ten-GigabitEthernet1/1/5] quit [Sysname] interface ten-gigabitethernet 2/1/5 [Sysname-Ten-GigabitEthernet2/1/5] port link-aggregation group 2 [Sysname-Ten-GigabitEthernet2/1/5] quit [Sysname] interface ten-gigabitethernet 3/1/5 [Sysname-Ten-GigabitEthernet3/1/5] port link-aggregation group 2 [Sysname-Ten-GigabitEthernet3/1/5] quit [Sysname] interface ten-gigabitethernet 4/1/5 [Sysname-Ten-GigabitEthernet4/1/5] port link-aggregation group 2 [Sysname-Ten-GigabitEthernet4/1/5] quit 6. Configure Device E as the intermediate device: CAUTION: If the intermediate device is also in an IRF fabric, assign the two IRF fabrics different domain IDs for correct split detection. False detection causes IRF split. # Create a dynamic aggregate interface. system-view [Sysname] interface bridge-aggregation 2 [Sysname-Bridge-Aggregation2] link-aggregation mode dynamic [Sysname-Bridge-Aggregation2] quit # Assign Ten-GigabitEthernet 1/0/1, Ten-GigabitEthernet 1/0/2, Ten-GigabitEthernet 1/0/3, and Ten-GigabitEthernet 1/0/4 to the aggregate interface. [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] port link-aggregation group 2 [Sysname-Ten-GigabitEthernet1/0/1] quit [Sysname] interface ten-gigabitethernet 1/0/2 [Sysname-Ten-GigabitEthernet1/0/2] port link-aggregation group 2 [Sysname-Ten-GigabitEthernet1/0/2] quit [Sysname] interface ten-gigabitethernet 1/0/3 [Sysname-Ten-GigabitEthernet1/0/3] port link-aggregation group 2 [Sysname-Ten-GigabitEthernet1/0/3] quit [Sysname] interface ten-gigabitethernet 1/0/4 [Sysname-Ten-GigabitEthernet1/0/4] port link-aggregation group 2 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
37
You need to assign a domain ID (range: 0-4294967295)
[Current domain is: 1]:
The assigned
domain ID is: 1
Info: MAD LACP only enable on dynamic aggregation interface.
[Sysname-Bridge-Aggregation2] quit
# Assign Ten-GigabitEthernet 1/1/5, Ten-GigabitEthernet 2/1/5, Ten-GigabitEthernet 3/1/5,
and Ten-GigabitEthernet 4/1/5 to the aggregate interface.
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] port link-aggregation group 2
[Sysname-Ten-GigabitEthernet1/1/5] quit
[Sysname] interface ten-gigabitethernet 2/1/5
[Sysname-Ten-GigabitEthernet2/1/5] port link-aggregation group 2
[Sysname-Ten-GigabitEthernet2/1/5] quit
[Sysname] interface ten-gigabitethernet 3/1/5
[Sysname-Ten-GigabitEthernet3/1/5] port link-aggregation group 2
[Sysname-Ten-GigabitEthernet3/1/5] quit
[Sysname] interface ten-gigabitethernet 4/1/5
[Sysname-Ten-GigabitEthernet4/1/5] port link-aggregation group 2
[Sysname-Ten-GigabitEthernet4/1/5] quit
6.
Configure Device E as the intermediate device:
CAUTION:
If the intermediate device is also in an IRF fabric, assign the two IRF fabrics different domain IDs for
correct split detection. False detection causes IRF split.
# Create a dynamic aggregate interface.
<Sysname> system-view
[Sysname] interface bridge-aggregation 2
[Sysname-Bridge-Aggregation2] link-aggregation mode dynamic
[Sysname-Bridge-Aggregation2] quit
# Assign Ten-GigabitEthernet 1/0/1, Ten-GigabitEthernet 1/0/2, Ten-GigabitEthernet 1/0/3,
and Ten-GigabitEthernet 1/0/4 to the aggregate interface.
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port link-aggregation group 2
[Sysname-Ten-GigabitEthernet1/0/1] quit
[Sysname] interface ten-gigabitethernet 1/0/2
[Sysname-Ten-GigabitEthernet1/0/2] port link-aggregation group 2
[Sysname-Ten-GigabitEthernet1/0/2] quit
[Sysname] interface ten-gigabitethernet 1/0/3
[Sysname-Ten-GigabitEthernet1/0/3] port link-aggregation group 2
[Sysname-Ten-GigabitEthernet1/0/3] quit
[Sysname] interface ten-gigabitethernet 1/0/4
[Sysname-Ten-GigabitEthernet1/0/4] port link-aggregation group 2