HP 6125XLG R2306-HP 6125XLG Blade Switch IRF Configuration Guide - Page 45
Con BFD MAD on the IRF fabric, Create VLAN 3, and add Ten-GigabitEthernet 1/1/5
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
reboot # Connect Device D to Device B and Device C as shown in Figure 15, and log in to Device D. This example uses the SFP+ port group that contains Ten-GigabitEthernet 4/1/7, Ten-GigabitEthernet 4/1/8, Ten-GigabitEthernet 4/1/11, and Ten-GigabitEthernet 4/1/12 for IRF connection. # Shut down the physical ports. system-view [Sysname] interface range name irf interface ten-gigabitethernet 4/1/7 ten-gigabitethernet 4/1/8 ten-gigabitethernet 4/1/11 ten-gigabitethernet 4/1/12 [Sysname-if-range-irf] shutdown [Sysname-if-range-irf] quit # Bind Ten-GigabitEthernet 4/1/7 and Ten-GigabitEthernet 4/1/8 to IRF-port 4/1. [Sysname] irf-port 4/1 [Sysname-irf-port4/1] port group interface ten-gigabitethernet 4/1/7 [Sysname-irf-port4/1] port group interface ten-gigabitethernet 4/1/8 [Sysname-irf-port4/1] quit # Bind Ten-GigabitEthernet 4/1/11 and Ten-GigabitEthernet 4/1/12 to IRF-port 4/2. [Sysname] irf-port 4/2 [Sysname-irf-port4/2] port group interface ten-gigabitethernet 4/1/11 [Sysname-irf-port4/2] port group interface ten-gigabitethernet 4/1/12 [Sysname-irf-port4/2] quit # Bring up the SFP+ ports and save the configuration. [Sysname] interface range name irf [Sysname-if-range-irf] undo shutdown [Sysname-if-range-irf] quit [Sysname] save # Activate the IRF port configuration. [Sysname] irf-port-configuration active Device D reboots to join the IRF fabric. A four-chassis IRF fabric is formed. 5. Configure BFD MAD on the IRF fabric: # Create VLAN 3, and add Ten-GigabitEthernet 1/1/5, Ten-GigabitEthernet 2/1/5, Ten-GigabitEthernet 3/1/5, and Ten-GigabitEthernet 4/1/5 to VLAN 3. [Sysname] vlan 3 [Sysname-vlan3] port ten-gigabitethernet 1/1/5 ten-gigabitethernet 2/1/5 ten-gigabitethernet 3/1/5 ten-gigabitethernet 4/1/5 [Sysname-vlan3] quit # Create VLAN-interface 3, and configure a MAD IP address for each member device on the VLAN interface. [Sysname] interface vlan-interface 3 [Sysname-Vlan-interface3] mad bfd enable [Sysname-Vlan-interface3] mad ip address 192.168.2.1 24 member 1 [Sysname-Vlan-interface3] mad ip address 192.168.2.2 24 member 2 [Sysname-Vlan-interface3] mad ip address 192.168.2.3 24 member 3 [Sysname-Vlan-interface3] mad ip address 192.168.2.4 24 member 4 [Sysname-Vlan-interface3] quit # Disable the spanning tree feature on Ten-GigabitEthernet 1/1/5, Ten-GigabitEthernet 2/1/5, Ten-GigabitEthernet 3/1/5, and Ten-GigabitEthernet 4/1/5. [Sysname] interface ten-gigabitethernet 1/1/5 41