HP 6125XLG R2306-HP 6125XLG Blade Switch IRF Configuration Guide - Page 49

Bind Ten-GigabitEthernet 4/1/7 and Ten-GigabitEthernet 4/1/8 to IRF-port 4/1.

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

# Connect Device C to Device A as shown in Figure 16, and log in to Device C. This example uses the SFP+ port group that contains Ten-GigabitEthernet 3/1/7, Ten-GigabitEthernet 3/1/8, Ten-GigabitEthernet 3/1/11, and Ten-GigabitEthernet 3/1/12 for IRF connection. # Shut down the physical ports. system-view [Sysname] interface range name irf interface ten-gigabitethernet 3/1/7 ten-gigabitethernet 3/1/8 ten-gigabitethernet 3/1/11 ten-gigabitethernet 3/1/12 [Sysname-if-range-irf] shutdown [Sysname-if-range-irf] quit # Bind Ten-GigabitEthernet 3/1/7 and Ten-GigabitEthernet 3/1/8 to IRF-port 3/1. [Sysname] irf-port 3/1 [Sysname-irf-port3/1] port group interface ten-gigabitethernet 3/1/7 [Sysname-irf-port3/1] port group interface ten-gigabitethernet 3/1/8 [Sysname-irf-port3/1] quit # Bind Ten-GigabitEthernet 3/1/11 and Ten-GigabitEthernet 3/1/12 to IRF-port 3/2. [Sysname] irf-port 3/2 [Sysname-irf-port3/2] port group interface ten-gigabitethernet 3/1/11 [Sysname-irf-port3/2] port group interface ten-gigabitethernet 3/1/12 [Sysname-irf-port3/2] quit # Bring up the SFP+ ports and save the configuration. [Sysname] interface range name irf [Sysname-if-range-irf] undo shutdown [Sysname-if-range-irf] quit [Sysname] save # Activate the IRF port configuration. [Sysname] irf-port-configuration active Device C reboots to join the IRF fabric. 4. Configure Device D: # Change the member ID of Device D to 4, and reboot the device to validate the change. system-view [Sysname] irf member 1 renumber 4 Renumbering the member ID may result in configuration change or loss. Continue? [Y/N]:y [Sysname] quit reboot # Connect Device D to Device B and Device C as shown in Figure 16, and log in to Device D. This example uses the SFP+ port group that contains Ten-GigabitEthernet 4/1/7, Ten-GigabitEthernet 4/1/8, Ten-GigabitEthernet 4/1/11, and Ten-GigabitEthernet 4/1/12 for IRF connection. # Shut down the physical ports. system-view [Sysname] interface range name irf interface ten-gigabitethernet 4/1/7 ten-gigabitethernet 4/1/8 ten-gigabitethernet 4/1/11 ten-gigabitethernet 4/1/12 [Sysname-if-range-irf] shutdown [Sysname-if-range-irf] quit # Bind Ten-GigabitEthernet 4/1/7 and Ten-GigabitEthernet 4/1/8 to IRF-port 4/1. [Sysname] irf-port 4/1 [Sysname-irf-port4/1] port group interface ten-gigabitethernet 4/1/7 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
45
# Connect Device C to Device A as shown in
Figure 16
, and log in to Device C. This example uses
the SFP+ port group that contains Ten-GigabitEthernet 3/1/7, Ten-GigabitEthernet 3/1/8,
Ten-GigabitEthernet 3/1/11, and Ten-GigabitEthernet 3/1/12 for IRF connection.
# Shut down the physical ports.
<Sysname> system-view
[Sysname] interface range name irf interface ten-gigabitethernet 3/1/7
ten-gigabitethernet 3/1/8 ten-gigabitethernet 3/1/11 ten-gigabitethernet 3/1/12
[Sysname-if-range-irf] shutdown
[Sysname-if-range-irf] quit
# Bind Ten-GigabitEthernet 3/1/7 and Ten-GigabitEthernet 3/1/8 to IRF-port 3/1.
[Sysname] irf-port 3/1
[Sysname-irf-port3/1] port group interface ten-gigabitethernet 3/1/7
[Sysname-irf-port3/1] port group interface ten-gigabitethernet 3/1/8
[Sysname-irf-port3/1] quit
# Bind Ten-GigabitEthernet 3/1/11 and Ten-GigabitEthernet 3/1/12 to IRF-port 3/2.
[Sysname] irf-port 3/2
[Sysname-irf-port3/2] port group interface ten-gigabitethernet 3/1/11
[Sysname-irf-port3/2] port group interface ten-gigabitethernet 3/1/12
[Sysname-irf-port3/2] quit
# Bring up the SFP+ ports and save the configuration.
[Sysname] interface range name irf
[Sysname-if-range-irf] undo shutdown
[Sysname-if-range-irf] quit
[Sysname] save
# Activate the IRF port configuration.
[Sysname] irf-port-configuration active
Device C reboots to join the IRF fabric.
4.
Configure Device D:
# Change the member ID of Device D to 4, and reboot the device to validate the change.
<Sysname> system-view
[Sysname] irf member 1 renumber 4
Renumbering the member ID may result in configuration change or loss. Continue? [Y/N]:y
[Sysname] quit
<Sysname> reboot
# Connect Device D to Device B and Device C as shown in
Figure 16
, and log in to Device D. This
example uses the SFP+ port group that contains Ten-GigabitEthernet 4/1/7, Ten-GigabitEthernet
4/1/8, Ten-GigabitEthernet 4/1/11, and Ten-GigabitEthernet 4/1/12 for IRF connection.
# Shut down the physical ports.
<Sysname> system-view
[Sysname] interface range name irf interface ten-gigabitethernet 4/1/7
ten-gigabitethernet 4/1/8 ten-gigabitethernet 4/1/11 ten-gigabitethernet 4/1/12
[Sysname-if-range-irf] shutdown
[Sysname-if-range-irf] quit
# Bind Ten-GigabitEthernet 4/1/7 and Ten-GigabitEthernet 4/1/8 to IRF-port 4/1.
[Sysname] irf-port 4/1
[Sysname-irf-port4/1] port group interface ten-gigabitethernet 4/1/7